|
Enter a Search String | Special character and space not allowed in the query term.
Search string should be at least 2 characters long. |
Molecule Parameter List for temp-PIP2 | The statistics table lists the distribution of a molecule acting either as a substrate, product, enzyme or as a molecule within the network. The text color of a molecule is highlighted by color. | Statistics |
temp-PIP2 participated as | Molecule | Sum total of | Enzyme | Substrate of an enzyme | Product of an enzyme | Substrate in Reaction | Product in Reaction | No. of occurrences | 25 | 0 | 0 | 0 | 0 | 50 | 0 |
Accession and Pathway Details | |
Accession Name | Accession No. | Accession Type | Pathway Link | Ajay_Bhalla_ 2007_ReacDiff3 | 84 | Network | Shared_Object_Ajay_Bhalla_2007_ReacDiff3, PKC, PLA2, MAPK, PLA2, Ras, CaM, chain, kinetics, PKC, MAPK, Ras, CaM, kinetics[1], PKC, PLA2, MAPK, Ras, CaM, kinetics[2], PKC, PLA2, MAPK, Ras, CaM, kinetics[3], PKC, PLA2, MAPK, Ras, CaM, kinetics[4], PKC, PLA2, MAPK, Ras, CaM, kinetics[5], PKC, PLA2, MAPK, Ras, MAPK, CaM, kinetics[6], PKC, PLA2, MAPK, Ras, CaM, kinetics[7], PKC, PLA2, MAPK, Ras, CaM, PKC, kinetics[8], PLA2, MAPK, Ras, CaM, kinetics[9], PKC, PLA2, MAPK, Ras, CaM, kinetics[10], PKC, PLA2, MAPK, Ras, CaM, kinetics[11], PKC, PLA2, MAPK, Ras, CaM, kinetics[12], PKC, PLA2, Ras, CaM, kinetics[13], PKC, PLA2, MAPK, Ras, CaM, kinetics[14], PKC, PLA2, MAPK, Ras, CaM, kinetics[15], PKC, PLA2, MAPK, Ras, kinetics[16], CaM, PKC, PLA2, MAPK, Ras, CaM, kinetics[17], PKC, PLA2, MAPK, Ras, CaM, kinetics[18], PKC, PLA2, MAPK, Ras, CaM, kinetics[19], PKC, PLA2, MAPK, Ras, CaM, kinetics[20], PKC, PLA2, MAPK, Ras, CaM, kinetics[21], PKC, PLA2, MAPK, Ras, CaM, kinetics[22], PKC, PLA2, MAPK, Ras, CaM, kinetics[23], PKC, PLA2, MAPK, Ras, CaM | This is a 25-compartment reaction-diffusion version of the Ajay_Bhalla_2007_bistable model. The original single-compartment model is repeated 25 times.
In addition, a subset (33 out of 50) molecules can diffuse between compartments. Diffusion is implemented as a reaction between corresponding molecules in neighboring compartments. Here D = 1e-13 m^2/sec (i.e., 0.1 micron^2/sec ) so the kf and kb of this reaction for these 10 micron compartments are both 0.001/sec.
The basal calcium level in this model is held at 95 nM which is rather close to threshold for the flip to the active state. This is necessary to sustain active propagation of activation.
The stimulus file bis6-propgn_D1e-13_FigEF which was used for the model to replicate Figure 4E and 4F from the paper. |
temp-PIP2 acting as a Molecule in Ajay_Bhalla_2007_ReacDiff3 Network
Name | Accession Name | Pathway Name | Initial Conc. (uM) | Volume (fL) | Buffered | temp-PIP2 | Ajay_Bhalla_ 2007_ReacDiff3 Accession No. : 84 | Shared_Object_ Ajay_Bhalla_ 2007_ReacDiff3 Pathway No. : 918 | 2.5 | 125.7 | Yes | This isn't explicitly present in the M&L model, but is obviously needed. I assume its conc is fixed at 1uM for now, which is a bit high. PLA2 is stim 7x by PIP2 @ 0.5 uM (Leslie and Channon BBA 1045:261(1990) Leslie and Channon say PIP2 is present at 0.1 - 0.2mol% range in membs, which comes to 50 nM. Ref is Majerus et al Cell 37 pp 701-703 1984 Lets use a lower level of 30 nM, same ref.... | temp-PIP2 | Ajay_Bhalla_ 2007_ReacDiff3 Accession No. : 84 | kinetics Pathway No. : 926 | 2.5 | 125.7 | Yes | This isn't explicitly present in the M&L model, but is obviously needed. I assume its conc is fixed at 1uM for now, which is a bit high. PLA2 is stim 7x by PIP2 @ 0.5 uM (Leslie and Channon BBA 1045:261(1990) Leslie and Channon say PIP2 is present at 0.1 - 0.2mol% range in membs, which comes to 50 nM. Ref is Majerus et al Cell 37 pp 701-703 1984 Lets use a lower level of 30 nM, same ref.... | temp-PIP2 | Ajay_Bhalla_ 2007_ReacDiff3 Accession No. : 84 | kinetics[1] Pathway No. : 931 | 2.5 | 125.7 | Yes | This isn't explicitly present in the M&L model, but is obviously needed. I assume its conc is fixed at 1uM for now, which is a bit high. PLA2 is stim 7x by PIP2 @ 0.5 uM (Leslie and Channon BBA 1045:261(1990) Leslie and Channon say PIP2 is present at 0.1 - 0.2mol% range in membs, which comes to 50 nM. Ref is Majerus et al Cell 37 pp 701-703 1984 Lets use a lower level of 30 nM, same ref.... | temp-PIP2 | Ajay_Bhalla_ 2007_ReacDiff3 Accession No. : 84 | kinetics[2] Pathway No. : 937 | 2.5 | 125.7 | Yes | This isn't explicitly present in the M&L model, but is obviously needed. I assume its conc is fixed at 1uM for now, which is a bit high. PLA2 is stim 7x by PIP2 @ 0.5 uM (Leslie and Channon BBA 1045:261(1990) Leslie and Channon say PIP2 is present at 0.1 - 0.2mol% range in membs, which comes to 50 nM. Ref is Majerus et al Cell 37 pp 701-703 1984 Lets use a lower level of 30 nM, same ref.... | temp-PIP2 | Ajay_Bhalla_ 2007_ReacDiff3 Accession No. : 84 | kinetics[3] Pathway No. : 943 | 2.5 | 125.7 | Yes | This isn't explicitly present in the M&L model, but is obviously needed. I assume its conc is fixed at 1uM for now, which is a bit high. PLA2 is stim 7x by PIP2 @ 0.5 uM (Leslie and Channon BBA 1045:261(1990) Leslie and Channon say PIP2 is present at 0.1 - 0.2mol% range in membs, which comes to 50 nM. Ref is Majerus et al Cell 37 pp 701-703 1984 Lets use a lower level of 30 nM, same ref.... | temp-PIP2 | Ajay_Bhalla_ 2007_ReacDiff3 Accession No. : 84 | kinetics[4] Pathway No. : 949 | 2.5 | 125.7 | Yes | This isn't explicitly present in the M&L model, but is obviously needed. I assume its conc is fixed at 1uM for now, which is a bit high. PLA2 is stim 7x by PIP2 @ 0.5 uM (Leslie and Channon BBA 1045:261(1990) Leslie and Channon say PIP2 is present at 0.1 - 0.2mol% range in membs, which comes to 50 nM. Ref is Majerus et al Cell 37 pp 701-703 1984 Lets use a lower level of 30 nM, same ref.... | temp-PIP2 | Ajay_Bhalla_ 2007_ReacDiff3 Accession No. : 84 | kinetics[5] Pathway No. : 955 | 2.5 | 125.7 | Yes | This isn't explicitly present in the M&L model, but is obviously needed. I assume its conc is fixed at 1uM for now, which is a bit high. PLA2 is stim 7x by PIP2 @ 0.5 uM (Leslie and Channon BBA 1045:261(1990) Leslie and Channon say PIP2 is present at 0.1 - 0.2mol% range in membs, which comes to 50 nM. Ref is Majerus et al Cell 37 pp 701-703 1984 Lets use a lower level of 30 nM, same ref.... | temp-PIP2 | Ajay_Bhalla_ 2007_ReacDiff3 Accession No. : 84 | kinetics[12] Pathway No. : 998 | 2.5 | 125.7 | Yes | This isn't explicitly present in the M&L model, but is obviously needed. I assume its conc is fixed at 1uM for now, which is a bit high. PLA2 is stim 7x by PIP2 @ 0.5 uM (Leslie and Channon BBA 1045:261(1990) Leslie and Channon say PIP2 is present at 0.1 - 0.2mol% range in membs, which comes to 50 nM. Ref is Majerus et al Cell 37 pp 701-703 1984 Lets use a lower level of 30 nM, same ref.... | temp-PIP2 | Ajay_Bhalla_ 2007_ReacDiff3 Accession No. : 84 | kinetics[6] Pathway No. : 962 | 2.5 | 125.7 | Yes | This isn't explicitly present in the M&L model, but is obviously needed. I assume its conc is fixed at 1uM for now, which is a bit high. PLA2 is stim 7x by PIP2 @ 0.5 uM (Leslie and Channon BBA 1045:261(1990) Leslie and Channon say PIP2 is present at 0.1 - 0.2mol% range in membs, which comes to 50 nM. Ref is Majerus et al Cell 37 pp 701-703 1984 Lets use a lower level of 30 nM, same ref.... | temp-PIP2 | Ajay_Bhalla_ 2007_ReacDiff3 Accession No. : 84 | kinetics[7] Pathway No. : 968 | 2.5 | 125.7 | Yes | This isn't explicitly present in the M&L model, but is obviously needed. I assume its conc is fixed at 1uM for now, which is a bit high. PLA2 is stim 7x by PIP2 @ 0.5 uM (Leslie and Channon BBA 1045:261(1990) Leslie and Channon say PIP2 is present at 0.1 - 0.2mol% range in membs, which comes to 50 nM. Ref is Majerus et al Cell 37 pp 701-703 1984 Lets use a lower level of 30 nM, same ref.... | temp-PIP2 | Ajay_Bhalla_ 2007_ReacDiff3 Accession No. : 84 | kinetics[8] Pathway No. : 975 | 2.5 | 125.7 | Yes | This isn't explicitly present in the M&L model, but is obviously needed. I assume its conc is fixed at 1uM for now, which is a bit high. PLA2 is stim 7x by PIP2 @ 0.5 uM (Leslie and Channon BBA 1045:261(1990) Leslie and Channon say PIP2 is present at 0.1 - 0.2mol% range in membs, which comes to 50 nM. Ref is Majerus et al Cell 37 pp 701-703 1984 Lets use a lower level of 30 nM, same ref.... | temp-PIP2 | Ajay_Bhalla_ 2007_ReacDiff3 Accession No. : 84 | kinetics[9] Pathway No. : 980 | 2.5 | 125.7 | Yes | This isn't explicitly present in the M&L model, but is obviously needed. I assume its conc is fixed at 1uM for now, which is a bit high. PLA2 is stim 7x by PIP2 @ 0.5 uM (Leslie and Channon BBA 1045:261(1990) Leslie and Channon say PIP2 is present at 0.1 - 0.2mol% range in membs, which comes to 50 nM. Ref is Majerus et al Cell 37 pp 701-703 1984 Lets use a lower level of 30 nM, same ref.... | temp-PIP2 | Ajay_Bhalla_ 2007_ReacDiff3 Accession No. : 84 | kinetics[10] Pathway No. : 986 | 2.5 | 125.7 | Yes | This isn't explicitly present in the M&L model, but is obviously needed. I assume its conc is fixed at 1uM for now, which is a bit high. PLA2 is stim 7x by PIP2 @ 0.5 uM (Leslie and Channon BBA 1045:261(1990) Leslie and Channon say PIP2 is present at 0.1 - 0.2mol% range in membs, which comes to 50 nM. Ref is Majerus et al Cell 37 pp 701-703 1984 Lets use a lower level of 30 nM, same ref.... | temp-PIP2 | Ajay_Bhalla_ 2007_ReacDiff3 Accession No. : 84 | kinetics[11] Pathway No. : 992 | 2.5 | 125.7 | Yes | This isn't explicitly present in the M&L model, but is obviously needed. I assume its conc is fixed at 1uM for now, which is a bit high. PLA2 is stim 7x by PIP2 @ 0.5 uM (Leslie and Channon BBA 1045:261(1990) Leslie and Channon say PIP2 is present at 0.1 - 0.2mol% range in membs, which comes to 50 nM. Ref is Majerus et al Cell 37 pp 701-703 1984 Lets use a lower level of 30 nM, same ref.... | temp-PIP2 | Ajay_Bhalla_ 2007_ReacDiff3 Accession No. : 84 | kinetics[13] Pathway No. : 1003 | 2.5 | 125.7 | Yes | This isn't explicitly present in the M&L model, but is obviously needed. I assume its conc is fixed at 1uM for now, which is a bit high. PLA2 is stim 7x by PIP2 @ 0.5 uM (Leslie and Channon BBA 1045:261(1990) Leslie and Channon say PIP2 is present at 0.1 - 0.2mol% range in membs, which comes to 50 nM. Ref is Majerus et al Cell 37 pp 701-703 1984 Lets use a lower level of 30 nM, same ref.... | temp-PIP2 | Ajay_Bhalla_ 2007_ReacDiff3 Accession No. : 84 | kinetics[14] Pathway No. : 1009 | 2.5 | 125.7 | Yes | This isn't explicitly present in the M&L model, but is obviously needed. I assume its conc is fixed at 1uM for now, which is a bit high. PLA2 is stim 7x by PIP2 @ 0.5 uM (Leslie and Channon BBA 1045:261(1990) Leslie and Channon say PIP2 is present at 0.1 - 0.2mol% range in membs, which comes to 50 nM. Ref is Majerus et al Cell 37 pp 701-703 1984 Lets use a lower level of 30 nM, same ref.... | temp-PIP2 | Ajay_Bhalla_ 2007_ReacDiff3 Accession No. : 84 | kinetics[15] Pathway No. : 1015 | 2.5 | 125.7 | Yes | This isn't explicitly present in the M&L model, but is obviously needed. I assume its conc is fixed at 1uM for now, which is a bit high. PLA2 is stim 7x by PIP2 @ 0.5 uM (Leslie and Channon BBA 1045:261(1990) Leslie and Channon say PIP2 is present at 0.1 - 0.2mol% range in membs, which comes to 50 nM. Ref is Majerus et al Cell 37 pp 701-703 1984 Lets use a lower level of 30 nM, same ref.... | temp-PIP2 | Ajay_Bhalla_ 2007_ReacDiff3 Accession No. : 84 | kinetics[16] Pathway No. : 1020 | 2.5 | 125.7 | Yes | This isn't explicitly present in the M&L model, but is obviously needed. I assume its conc is fixed at 1uM for now, which is a bit high. PLA2 is stim 7x by PIP2 @ 0.5 uM (Leslie and Channon BBA 1045:261(1990) Leslie and Channon say PIP2 is present at 0.1 - 0.2mol% range in membs, which comes to 50 nM. Ref is Majerus et al Cell 37 pp 701-703 1984 Lets use a lower level of 30 nM, same ref.... | temp-PIP2 | Ajay_Bhalla_ 2007_ReacDiff3 Accession No. : 84 | kinetics[17] Pathway No. : 1027 | 2.5 | 125.7 | Yes | This isn't explicitly present in the M&L model, but is obviously needed. I assume its conc is fixed at 1uM for now, which is a bit high. PLA2 is stim 7x by PIP2 @ 0.5 uM (Leslie and Channon BBA 1045:261(1990) Leslie and Channon say PIP2 is present at 0.1 - 0.2mol% range in membs, which comes to 50 nM. Ref is Majerus et al Cell 37 pp 701-703 1984 Lets use a lower level of 30 nM, same ref.... | temp-PIP2 | Ajay_Bhalla_ 2007_ReacDiff3 Accession No. : 84 | kinetics[18] Pathway No. : 1033 | 2.5 | 125.7 | Yes | This isn't explicitly present in the M&L model, but is obviously needed. I assume its conc is fixed at 1uM for now, which is a bit high. PLA2 is stim 7x by PIP2 @ 0.5 uM (Leslie and Channon BBA 1045:261(1990) Leslie and Channon say PIP2 is present at 0.1 - 0.2mol% range in membs, which comes to 50 nM. Ref is Majerus et al Cell 37 pp 701-703 1984 Lets use a lower level of 30 nM, same ref.... | temp-PIP2 | Ajay_Bhalla_ 2007_ReacDiff3 Accession No. : 84 | kinetics[19] Pathway No. : 1039 | 2.5 | 125.7 | Yes | This isn't explicitly present in the M&L model, but is obviously needed. I assume its conc is fixed at 1uM for now, which is a bit high. PLA2 is stim 7x by PIP2 @ 0.5 uM (Leslie and Channon BBA 1045:261(1990) Leslie and Channon say PIP2 is present at 0.1 - 0.2mol% range in membs, which comes to 50 nM. Ref is Majerus et al Cell 37 pp 701-703 1984 Lets use a lower level of 30 nM, same ref.... | temp-PIP2 | Ajay_Bhalla_ 2007_ReacDiff3 Accession No. : 84 | kinetics[20] Pathway No. : 1045 | 2.5 | 125.7 | Yes | This isn't explicitly present in the M&L model, but is obviously needed. I assume its conc is fixed at 1uM for now, which is a bit high. PLA2 is stim 7x by PIP2 @ 0.5 uM (Leslie and Channon BBA 1045:261(1990) Leslie and Channon say PIP2 is present at 0.1 - 0.2mol% range in membs, which comes to 50 nM. Ref is Majerus et al Cell 37 pp 701-703 1984 Lets use a lower level of 30 nM, same ref.... | temp-PIP2 | Ajay_Bhalla_ 2007_ReacDiff3 Accession No. : 84 | kinetics[21] Pathway No. : 1051 | 2.5 | 125.7 | Yes | This isn't explicitly present in the M&L model, but is obviously needed. I assume its conc is fixed at 1uM for now, which is a bit high. PLA2 is stim 7x by PIP2 @ 0.5 uM (Leslie and Channon BBA 1045:261(1990) Leslie and Channon say PIP2 is present at 0.1 - 0.2mol% range in membs, which comes to 50 nM. Ref is Majerus et al Cell 37 pp 701-703 1984 Lets use a lower level of 30 nM, same ref.... | temp-PIP2 | Ajay_Bhalla_ 2007_ReacDiff3 Accession No. : 84 | kinetics[22] Pathway No. : 1057 | 2.5 | 125.7 | Yes | This isn't explicitly present in the M&L model, but is obviously needed. I assume its conc is fixed at 1uM for now, which is a bit high. PLA2 is stim 7x by PIP2 @ 0.5 uM (Leslie and Channon BBA 1045:261(1990) Leslie and Channon say PIP2 is present at 0.1 - 0.2mol% range in membs, which comes to 50 nM. Ref is Majerus et al Cell 37 pp 701-703 1984 Lets use a lower level of 30 nM, same ref.... | temp-PIP2 | Ajay_Bhalla_ 2007_ReacDiff3 Accession No. : 84 | kinetics[23] Pathway No. : 1063 | 2.5 | 125.7 | Yes | This isn't explicitly present in the M&L model, but is obviously needed. I assume its conc is fixed at 1uM for now, which is a bit high. PLA2 is stim 7x by PIP2 @ 0.5 uM (Leslie and Channon BBA 1045:261(1990) Leslie and Channon say PIP2 is present at 0.1 - 0.2mol% range in membs, which comes to 50 nM. Ref is Majerus et al Cell 37 pp 701-703 1984 Lets use a lower level of 30 nM, same ref.... |
temp-PIP2 acting as a Substrate in a reaction in Ajay_Bhalla_2007_ReacDiff3 Network
Kd is calculated only for second order reactions, like nA+nB <->nC or nA<->nC+nD, where n is number and A,B,C,D are molecules, where as for first order reactions Keq is calculated.
Kd for higher order reaction are not consider. |
| Database compilation and code copyright (C) 2022, Upinder S. Bhalla and NCBS/TIFR This Copyright is applied to ensure that the contents of this database remain freely available. Please see FAQ for details. |
|